Jining Luoling New Mining Products Co., Ltd

Mining Anchoring Agentis a widely used material in the field of engineering, and its main uses are reflected in the following aspects:

Fixing the rebar: Before the concrete is poured, the rebar is inserted into place and then anchored in the concrete. In this way, when the concrete is solidified, the rebar will not move or be misaligned, ensuring the stability and safety of the structure.

 

Improves the load-bearing capacity of the structure: Since the Mining Anchoring Agentis able to hold the rebar firmly in the concrete, the rebar and the concrete are able to work together to withstand external forces. This can not only improve the load-bearing capacity of the structure, but also reduce the fatigue damage of the rebar, thereby extending the service life of the structure.

 

The manufacturing process of Mining Anchoring Agentgenerally includes the following steps:

Material formulation: Formulate the raw materials required for the Mining Anchoring Agentin the required proportion, including powdered solid components, liquid additives and water. In this process, weighing devices, mixers and other equipment need to be used to ensure that the amount of various raw materials is accurate.

 

Drying: The prepared materials are sent to the drying room for drying to obtain dry Mining Anchoring Agentraw materials.

 

Granulation: The dry Mining Anchoring Agentraw materials are fed into the granulator for granulation, so as to obtain granular Mining Anchoring Agentparticles.

 

Spraying: The granulated Mining Anchoring Agentparticles are fed into the spraying machine, and liquid additives such as epoxy resin are added. By means of gas pressure, the Mining Anchoring Agentparticles are sprayed onto the surface of the component to be fixed.

 

Hardening: Components coated with anchor particles are fed into a curing chamber and hardened at a certain temperature and humidity to form a strong connection.

 

Please note that the above steps are only a rough description of the manufacturing process, and the specific steps and materials required may vary depending on the characteristics and use of the product. Therefore, in the actual production process, it should be operated in strict accordance with the product instructions and related standards to ensure the quality and performance of the anchoring agent. At the same time, the production personnel should have the corresponding professional knowledge and operational skills to ensure the smooth progress of the production process.

http://www.kycpxs.com/